Thiết bị tạo thử cao áp AID-70/50Technical SpecificationsThiết bị tạo thử cao áp
Characteristic Value
Single-phase AC power supply voltage, V 220 ± 11
Power supply frequency, Hz 50 ± 1
Maximum operating voltage (RMS), kV:
- on the rectified voltage under continuous running duty Thiết bị tạo thử cao áp 70
- on the AC voltage under continuous running duty Thiết bị tạo thử cao áp 50
- on the AC voltage under recursive short-time duty mode* Thiết bị tạo thử cao áp 50
Maximum operating current, mA:
- on the rectified voltage under continuous running duty Thiết bị tạo thử cao áp 14
- on the AC voltage under continuous running duty Thiết bị tạo thử cao áp 20
- on the AC voltage under recursive short-time duty mode* Thiết bị tạo thử cao áp 45
Conventional error of output voltage measurement, %, max ± 3
Conventional error of output current measurement on the rectified voltage, %, max Thiết bị tạo thử cao áp ± 3
Test current measurement ranges on the rectified voltage, mA 0.05 -1; 1-15
Thiết bị tạo thử cao áp Power consumption, kVA, max 3
Net weight, kg, max:
- Control unit 15
- High voltage unit 42
Dimensions, mm, max:
- Control unit 360х340х205
- High voltage unit 660х350х285
Lifespan, years, avg Thiết bị tạo thử cao áp 10
* AID-70/50 worksxxon the AC voltage under recursive short-time duty modexxwith the cyclic duration factor of 17% and the cycle time of 6 minutes.
·xxThiết bị thử cao áp AID-70/50xxxxxxxx xxxx

Operating ConditionsThiết bị tạo thử cao áp

The device is designed for an indoors operation under the following conditions:
Condition Value
Air temperature, °С from -10 to +40
Relative humidity, %, up to 80 at +20 °С
Atmospheric pressure, kPa (mmhg)xx 84,0 – 106,7 (630 – 800)
Warranty:xx12 months Thiết bị tạo thử cao áp
Tham khảo tại công ty cổ phần thiết bị hitech quốc tế